JPexamのL50-502試験参考書はあなたを一回で試験に合格させるだけでなく、L50-502認定試験に関連する多くの知識を勉強させることもできます。JPexamの問題集はあなたが身に付けるべき技能をすべて含んでいます。そうすると、あなたは自分自身の能力をよく高めることができ、仕事でよりよくそれらを適用することができます。JPexam的L50-502問題集は絶対あなたがよく試験に準備して、しかも自分を向上させる一番良い選択です。JPexamがあなたに美しい未来を与えることができることを信じてください。
L50-502認定試験の資格を取得するのは容易ではないことは、すべてのIT職員がよくわかっています。しかし、L50-502認定試験を受けて資格を得ることは自分の技能を高めてよりよく自分の価値を証明する良い方法ですから、選択しなければならならないです。ところで、受験生の皆さんを簡単にIT認定試験に合格させられる方法がないですか。もちろんありますよ。JPexamの問題集を利用することは正にその最良の方法です。JPexamはあなたが必要とするすべてのL50-502参考資料を持っていますから、きっとあなたのニーズを満たすことができます。JPexamのウェブサイトに行ってもっとたくさんの情報をブラウズして、あなたがほしい試験L50-502参考書を見つけてください。
試験番号：L50-502問題集
試験科目：LSI SVM5 Solutions Architect
最近更新時間：2014-02-02
問題と解答：全114問
100％の返金保証。1年間の無料アップデート。
あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。JPexam LSIのL50-502試験問題集はあなたが自分の目標を達成することを助けられます。JPexam LSIのL50-502問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の１００パーセント真実な解答を提供することを保証します。
LSIのL50-502の認定試験に受かることはIT業種に従事している皆さんの夢です。あなたは夢を実現したいのなら、プロなトレーニングを選んだらいいです。JPexamは専門的にIT認証トレーニング資料を提供するサイトです。JPexamはあなたのそばにいてさしあげて、あなたの成功を保障します。あなたの目標はどんなに高くても、JPexamはその目標を現実にすることができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/L50-502_exam.html
NO.1 A customer has an AIX high availability cluster multiprocessing (HACMP) environment and would like to
use SVM to provide additional storage to the cluster. Which consideration must be met to access the new
volumes?
A. The AIX light agent must be installed on all nodes.
B. The new volumes must be imported into a volume group.
C. The LSI failover driver must be installed on all nodes.
D. The MPIO driver must be disabled on all nodes.
Answer: A
LSI参考書 L50-502 L50-502 L50-502認証試験 L50-502認証試験 L50-502参考書
NO.2 Your customer is looking for a high availability solution for company-critical data with an RPO of 0.
Periodically the customer would like to verify the integrity of replicated data. You configure two SVM
domains on two sites and use synchronous multiMirror between the two sites. What are two methods to
verify the data? (Choose two.)
A. Create a PiT on the synchronous multiMirror group, create a view on the second synchronous mirror
job PiT and assign it to a host.
B. Use multiCopy for one of the synchronous multiMirror jobs and then assign the destination volume to a
host.
C. Create a PiT on the second synchronous multiMirror job, create a view for that PiT and assign it to a
host.
D. Create a PiT on the first synchronous multiMirror job, create a view for that PiT and assign it to a host.
Answer: A,C
LSI過去問 L50-502 L50-502 L50-502 L50-502認証試験
NO.3 A customer has an environment that includes existing VMware disks that must be imported into SVM.
VMware marks a signature on the volumes which identifies the controller WWNN and LUN ID. Which
statement describes what you need to take into account when migrating the VMware disks under SVM
control?
A. VMware will not resignature automatically.
B. VMware will present the same LUN ID after importing.
C. VMware will modify the DPM WWNN to match the array WWNN.
D. VMware resignaturing must be set correctly.
Answer: D
LSI L50-502 L50-502問題集 L50-502参考書 L50-502認証試験
NO.4 A retailer with a SQL database must pull statistics from a production database but would like to do so
without interfering with production work. The statistics are required by three different departments. Which
two methods could be used to do this? (Choose two.)
A. Use multiMigrate on the database volume with one job and assign the destination volume to the three
hosts.
B. Use multiMirror asynchronous on the database volume with three jobs and assign the jobs to the three
hosts.
C. Use multiView on the database volume to create a PiT; create three views for that PiT and assign it to
the three hosts.
D. Use multiCopy on the database volume with three jobs and assign each destination volume to the
three hosts.
Answer: C,D
LSI参考書 L50-502参考書 L50-502 L50-502
NO.5 A financial institution has an Oracle application that is critical to its business. Which three factors will
enable you to assess how to provide high availability and recovery? (Choose three.)
A. application recovery time objective
B. application recovery point objective
C. distance between data centers
D. number of network adapters
E. distance between servers
Answer: A,B,C
LSI練習問題 L50-502認定資格 L50-502
NO.6 You are trying to determine the optimal solution to meet the data recovery needs of a customer. What
will provide your customer with the smallest recovery time objective and array failure protection?
A. asynchronous multiMirror
B. multiView
C. multiCopy
D. synchronous multiMirror
Answer: D
LSI L50-502 L50-502 L50-502 L50-502認証試験 L50-502問題集
NO.7 A customer would like to implement SVM into their current storage environment and has asked you to
provide a detailed overview of both the SVM and DPM architectures. Where would you suggest that they
locate the required information?
A. Host Compatibility Matrix
B. Deployment Guide for SVM 4
C. SVM User Guide
D. Configuration Knowledge Base for SVM 5
Answer: C
LSI L50-502過去問 L50-502 L50-502
NO.8 You have a disaster recovery scenario where newly created SVM Views will be presented to an ESX
server or ESX cluster at a secondary site. To avoid importing the views as new volumes, which ESX
advanced setting should be enabled?
A. port retry
B. resignature
C. device reset
D. LUN reset
Answer: B
LSI L50-502 L50-502認定試験 L50-502 L50-502
NO.9 You are implementing zoning for an SVM 5 environment. Which rule should you observe when zoning
servers with DPMs?
A. There should be no more than four paths per DPM to any one server.
B. There should be no more than two paths per DPM to any one server.
C. All servers and DPM front-end ports should reside in the same zone.
D. The servers should be zoned directly with the storage controllers.
Answer: B
LSI練習問題 L50-502参考書 L50-502 L50-502
NO.10 Your customer has recently begun using hourly PiTs for rapid application recovery. The desire is to
implement a data retention plan where each hourly PiT is kept on disk until 8:00 PM. Four weeks?worth
the customer would like to keep a daily snapshot copy of the data for seven days. Also the customer
wants to keep four weeks worth of weekly views on a secondary, low cost array. The solution should
minimize disk utilization on the primary array. Which three tasks would you implement to accomplish this
goal? (Choose three.)
A. Create a multiCopy of the application data and keep seven copies.
B. Create a View on the most recent PiT each night at 8:00 PM and retain for seven days.
C. Create a multiCopy of the Sunday View to the second array and keep four copies.
D. Purge PiTs on the source volume at 8:00 PM to keep seven PiTs.
E. Use multiMigrate to move the Sunday View to the second array and keep four copies.
Answer: B,C,D
LSI問題集 L50-502 L50-502
NO.11 Which storage arrays can be migrated under SVM 5 control.?
A. SAS storage array
B. iSCSI storage array
C. FC storage array
D. Infiniband storage array
Answer: C
LSI L50-502参考書 L50-502 L50-502
NO.12 Your customer would like to consolidate multiple storage arrays which are currently under-utilized. The
SAN is not currently managed by SVM. The customer desires the minimal impact to their applications.
Which two statements describe the process to consolidate the arrays under SVM? (Choose two.)
A. Import existing LUNs into SVM pools.
B. Use multiMigrate to move the volumes to the desired array.
C. Use asynchronous mirror to move the volumes to the desired array.
D. Use multiMigrate to move the volumes to the desired array and remove SVM.
Answer: A,B
LSI参考書 L50-502認定試験 L50-502 L50-502
NO.13 A customer is using SVM to provide five volumes to a Windows 2008 server. These volumes have
been converted to dynamic disks and striped using the OS. Which consideration should be met if the
customer would like to use PiTs and views to access this data from another server?
A. The data cannot be accessed from another host.
B. multiMigrate should be used to migrate the data to a single volume.
C. A consistency group should be defined for the five volumes.
D. The standard agent must be used to access the view.
Answer: C
LSI認定証 L50-502 L50-502認定証 L50-502過去問
NO.14 You are deploying ESX servers with SVM. You have followed the recommended best practice and
have designed your front-end SAN to have redundant fabrics and allowed for both HBA initiator ports to
see both DPMs. You have created SVM volumes and have presented them to your ESX servers. After
performing an HBA rescan from an ESX server, how many paths should be available to each LUN?
A. 2
B. 4
C. 8
D. 16
Answer: B
LSI L50-502認定資格 L50-502 L50-502過去問 L50-502練習問題 L50-502練習問題
NO.15 Your customer wants to run backups at any time of the day, using snapshots of production data, leaving
production systems fully online and available during backups. Which SVM application would be used to
achieve their online backup requirement?
A. multiMigrate
B. multiMirror
C. multiView
D. SVM volume management
Answer: C
LSI L50-502 L50-502認定試験 L50-502認定資格
JPexamは最新の100-101問題集と高品質のLOT-405問題と回答を提供します。JPexamのHP2-N35 VCEテストエンジンとE20-385試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の00M-624 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论