IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてIIAのIIA-CIA-Part3試験に参加して認可を得たくて、IIA のIIA-CIA-Part3試験が難度の高いので合格率も比較的低いです。IIAのIIA-CIA-Part3試験を申し込むのは賢明な選択で今のは競争の激しいIT業界では、絶えず自分を高めるべきです。しかし多くの選択肢があるので君はきっと悩んでいましょう。
IIA-CIA-Part3認定試験の準備をするために一生懸命勉強して疲れを感じるときには、他の人が何をしているかを知っていますか。あなたと同じIT認定試験を受験する周りの人を見てください。あなたが試験のために不安と感じているとき、どうして他の人が自信満々で、のんびり見ているのでしょうか。あなたの能力は彼らうより弱いですか。もちろんそんなことはないです。では、なぜ他の人が簡単にIIA-CIA-Part3試験に合格することができるかを知りたいですか。それは彼らがJPexam のIIA-CIA-Part3問題集を利用したからです。この問題集を勉強することだけで楽に試験に合格することができます。信じないのですか。不思議を思っていますか。では、急いで試してください。まず問題集のdemoを体験することができます。そうすれば、この問題集の品質を確認することができます。はやくJPexamのサイトをクリックしてください。
JPexamはあなたに素晴らしい資料を提供するだけでなく、良いサービスも提供してあげます。JPexamの試験IIA-CIA-Part3問題集を購入したら、JPexamは無料で一年間のアップデートを提供します。すると、あなたがいつでも最新のIIA-CIA-Part3試験情報を持つことができます。それに、万一の場合、問題集を利用してからやはり試験に失敗すれば、JPexamは全額返金のことを約束します。こうすれば、まだ何を心配しているのですか。心配する必要がないでしょう。JPexamは自分の資料に十分な自信を持っていますから、あなたもJPexamを信じたほうがいいです。あなたのIIA-CIA-Part3試験の成功のために、JPexamをミスしないでください。JPexamをミスすれば、あなたが成功するチャンスを見逃したということになります。
試験番号：IIA-CIA-Part3問題集
試験科目：Certified Internal Auditor - Part 3, Business Analysis and Information Technology
最近更新時間：2014-06-30
問題と解答：全1554問 IIA-CIA-Part3 資格問題集
100％の返金保証。1年間の無料アップデート。
>>詳しい紹介はこちら
あなたはJPexamが提供したIIAのIIA-CIA-Part3認定試験の問題集だけ利用して合格することが問題になりません。ほかの人を超えて業界の中で最大の昇進の機会を得ます。もしあなたはJPexamの商品がショッピング車に入れて24のインターネットオンライン顧客サービスを提供いたします。問題があったら気軽にお問いください、
JPexamのITの専門研究者はIIA IIA-CIA-Part3認証試験の問題と解答を研究して、彼らはあなたにとても有効な訓練試験オンラインサービスツールを提供します。もしあなたはJPexamの製品を購入したければ弊社が詳しい問題集を提供して、君にとって完全に準備します。弊社のJPexam商品を安心に選択してJPexam試験に100%合格しましょう。
JPexamは多くの人に便利を与えるとともに、多くの人の夢が実現させるサイトでございます。もし君はまだIT試験で心配すれば、私達JPexamの問題集を選んでください。JPexamは長年の研究をわたって研ITの認証試験に関する品質が高く、範囲は広い教育資料が開発しました。それは確かに君の試験に役に立つとみられます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/IIA-CIA-Part3_exam.html
NO.1 The use of teams in total quality management (TQM) is important because:
A. Well-managed teams can be highly creative and are able to address complex problems better
than individuals can.
B. Teams are quicker to make decisions, thereby helping to reduce cycle time.
C. Employee motivation is higher for team members than for individual contributors.
D. The use of teams eliminates the need for supervision, thereby allowing a company to become
leaner and more profitable.
Answer: A
IIA IIA-CIA-Part3過去問 IIA-CIA-Part3参考書
Explanation:
Teams can use the diverse knowledge and skills of all team members. Employee involvement means
training and empowering employees to harness their creativity for problem solving. Quality control
circles are used to obtain input from employees and to locate the best perspective on problem
solving.
NO.2 Focusing on customers, promoting innovation, learning new philosophies, driving out fear, and
providing extensive training are all elements of a major change in organizations. These elements are
aimed primarily at:
A. Copying leading organizations to better compete with them.
B. Focusing on the total quality of products and services.
C. Being efficient and effective at the same time, in order to indirectly affect profits.
D. Managing costs of products and services better, in order to become the low-cost provider.
Answer: B
IIA IIA-CIA-Part3 IIA-CIA-Part3関節
Explanation:
TQM is a comprehensive approach to quality. It treats the pursuit of quality as a basic organizational
function that is as important as production or marketing. TQM is the continuous pursuit of quality in
every aspect of organizational activities through (1) a philosophy of doing it right the first time; (2)
employee training and empowerment; (3) promotion of teamwork; (4) improvement of processes;
and (5) attention to satisfaction of customers, both internal and external. TQM emphasizes the
supplier's relationship with the customer, identifies customer needs, and recognizes that everyone
in a process is at some time a customer or supplier of someone else, either inside or outside of the
organization.
NO.3 A company with many branch stores has decided to use its best-performing store as a
benchmark organization for the purpose of analyzing the accuracy and reliability of branch store
financial reporting.
Which one of the following is the most likely measure to be included in a financial benchmark?
A. High turnover of employees.
B. High level of employee participation in setting budgets.
C. High amount of bad debt write-offs.
D. High number of suppliers.
Answer: C
IIA学習 IIA-CIA-Part3 IIA-CIA-Part3入門 IIA-CIA-Part3初心者
Explanation:
Internal benchmarking is the application of best practices in one part of the organization (e.g., a
high-performing branch store) to its other parts (other branches). This process requires, among
other things, use of quantitative and qualitative measures. A key indicator for financial performance
measurement is the amount of bad debt write-offs. A high level of bad debt write-offs could
indicate fraud, which would compromise the accuracy and reliability of financial reports. Bad debt
write-offs may result from recording fictitious sales.
NO.4 Which of the following costs of quality is a failure cost?
A. Systems development costs.
B. Costs of inspecting in-process items.
C. Contract penalty for delivery of nonconforming goods.
D. Costs of quality circles.
Answer: C
IIA教育 IIA-CIA-Part3攻略 IIA-CIA-Part3関節
Explanation:
Failure costs are incurred after defective output has been removed from production. A contract
penalty for faulty goods is an example of an external failure cost.
NO.5 All of the following are generally included in a cost-of-quality report except:
A. Warranty claims.
B. Design engineering.
C. Supplier evaluations.
D. Lost contribution margin.
Answer: D
IIA認定試験 IIA-CIA-Part3認定資格 IIA-CIA-Part3番号 IIA-CIA-Part3認証試験 IIA-CIA-Part3方法
Explanation:
A cost-of-quality report includes most costs related to quality, specifically the costs of prevention,
appraisal, internal failure, and external failure.
11. Which of the following is not an appropriate measure of quality?
A. Market share.
B. Delivery performance.
C. Customer satisfaction.
D. Raw materials costs.
Answer: D
IIA一発合格 IIA-CIA-Part3ふりーく IIA-CIA-Part3通信 IIA-CIA-Part3内容 IIA-CIA-Part3内容
Explanation:
Emphasizing lower input costs may result in more defective output, and higher input costs may or
may not reflect the procurement of better raw materials. Financial measures are thus mostly
unsuitable for measuring quality.
12. One of the main reasons that implementation of a total quality management (TQM) program
works better through the use of teams is:
A. Teams are more efficient and help an organization reduce its staffing.
B. Employee motivation is always higher for team members than for individual contributors.
C. Teams are a natural vehicle for sharing ideas, which leads to process improvement.
D. The use of teams eliminates the need for supervision, thereby allowing a company to reduce
staffing.
Answer: C
IIAクラムメディア IIA-CIA-Part3クラムメディア IIA-CIA-Part3内容 IIA-CIA-Part3
Explanation:
TQM promotes teamwork by modifying or eliminating traditional (and rigid) vertical hierarchies and
instead forming flexible groups of specialists. Quality circles, cross-functional teams, and
self-managed teams are typical formats. Teams are an excellent means of encouraging the sharing
of ideas and removing process improvement obstacles.
13. If a company is customer-centered, its customers are defined as:
A. Only people external to the company who have purchased something from the company.
B. Only people internal to the company who directly use its product.
C. Anyone external to the company and those internal who rely on its product to get their job done.
D. Everybody external to the company who is currently doing, or may in the future do, business with
the company.
Answer: C
IIA vue IIA-CIA-Part3取得 IIA-CIA-Part3特典 IIA-CIA-Part3体験 IIA-CIA-Part3認定試験
Explanation:
One of the principles of total quality management (TQM) is customer orientation, whether the
customer is internal or external. An internal customer is a member of the organization who relies on
another member's work to accomplish his/her task.
14. Management of a company is attempting to build a reputation as a world-class manufacturer
of quality products. Which of the following measures would not be used by the firm to measure
quality?
A. The percentage of shipments returned by customers because of poor quality.
B. The number of parts shipped per day.
C. The number of defective parts per million.
D. The percentage of products passing quality tests the firsttime
Answer: B
IIA教科書 IIA-CIA-Part3認定 IIA-CIA-Part3教本
Explanation:
The number of parts shipped per day would most likely be used as a measure of the effectiveness
and efficiency of shipping procedures, not the quality of the product. This measure does not
consider how many of the parts are defective.
15. Quality costing is similar in service and manufacturing organizations. Nevertheless, the
differences
between these organizations have certain implications for quality management. Thus,
A. Direct labor costs are usually a higher percentage of total costs in manufacturing organizations.
B. External failure costs are relatively greater in service organizations.
C. Quality improvements resulting in more efficient use of labor time are more likely to be accepted
by employees in service organizations.
D. Poor service is less likely to result in loss of customers than a faulty product.
Answer: B
IIA虎の巻 IIA-CIA-Part3難易度 IIA-CIA-Part3内容 IIA-CIA-Part3教本
Explanation:
External failure costs arise when problems occur after delivery. They occur because products or
services are nonconforming or otherwise do not satisfy customers. External failure costs in service
enterprises are even more important than in manufacturing environments. Faulty goods sometimes
maybe reworked or replaced to a customer's satisfaction, but poor service tends to result in a loss of
customers.
16. A means of limiting production delays caused by equipment breakdown and repair is to:
A. Schedule production based on capacity planning.
B. Plan maintenance activity based on an analysis of equipment repair work orders.
C. Pre-authorize equipment maintenance and overtime pay.
D. Establish a preventive maintenance program for all production equipment.
Answer: D
IIA練習 IIA-CIA-Part3認定証 IIA-CIA-Part3参考書 IIA-CIA-Part3フリーク
Explanation:
A preventive maintenance program reduces equipment breakdowns and repairs.
17. Under a total quality management (TQM) approach,
A. Measurement occurs throughout the process, and errors are caught and corrected at the source.
B. Quality control is performed by highly trained inspectors at the end of the production process.
C. Upper management assumes the primary responsibility for the quality of the products and
services.
D. A large number of suppliers are used in order to obtain the lowest possible prices.
Answer: A
IIA費用 IIA-CIA-Part3 IIA-CIA-Part3攻略 IIA-CIA-Part3認定証
Explanation:
TQM emphasizes quality as a basic organizational function. TQM is the continuous pursuit of quality
in every aspect of organizational activities. One of the basic principles of TQM is doing it right the
first time. Thus, errors should be caught and corrected at the source.
18. Which of the following is a key to successful total quality management (TQM)?
A. Training quality inspectors.
B. Focusing intensely on the customer.
C. Creating appropriate hierarchies to increase efficiency.
D. Establishing a well-defined quality standard, then focusing on meeting it.
Answer: B
IIA IIA-CIA-Part3 IIA-CIA-Part3攻略 IIA-CIA-Part3独学 IIA-CIA-Part3費用 IIA-CIA-Part3認定資格
Explanation:
TQM emphasizes satisfaction of customers, both internal and external. TQM considers the supplier's
relationship with the customer, identifies customer needs, and recognizes that everyone in a
process is at some time a customer or supplier of someone else, either inside or outside of the
organization. Thus, TQM begins with external customer requirements, identifies internal
customer-supplier relationships and requirements, and establishes requirements for external
suppliers.
19. The four categories of costs associated with product quality costs are:
A. External failure, internal failure, prevention, and carrying.
B. External failure, internal failure, prevention, and appraisal.
C. External failure, internal failure, training, and appraisal.
D. Warranty, product liability, training, and appraisal.
Answer: B
IIA参考書 IIA-CIA-Part3割引 IIA-CIA-Part3フリーク IIA-CIA-Part3練習 IIA-CIA-Part3練習問題
Explanation:
Prevention costs are incurred to prevent defects. Appraisal costs are incurred to detect defective
output during and after the production process. Internal failure costs are associated with defective
output discovered before shipping. External failure costs are associated with defective output
discovered after it has reached the customer.
20. Statistical quality control often involves the use of control charts whose basic purpose is to:
A. Determine when accounting control procedures are not working.
B. Control labor costs in production operations.
C. Detect performance trends away from normal operations.
D. Monitor internal control applications of information technology.
Answer: C
IIA講座 IIA-CIA-Part3 IIA-CIA-Part3過去 IIA-CIA-Part3短期
Explanation:
Statistical control charts are graphic aids for monitoring the status of any process subject to random
variations. The chart consists of three horizontal lines plotted on a horizontal time scale. The vertical
scale represents the appropriate quantitative measure. The center line represents the average range
or overall mean for the process being controlled. The other two lines are the upper control limit and
the lower control limit. The processes are measured periodically, and the values are plotted on the
chart. If the value falls within the control limits, no action is taken. If the value falls outside the limits,
the process is considered "out of control," and an investigation is made for possible corrective
action. Another advantage of the chart is that it makes trends visible.
NO.6 Which of the following is not required by ISO 9000 standards?
A. Establishment of a quality management system.
B. Creation of an internal audit system.
C. Consistent high quality products.
D. Onsite inspections by a registrar.
Answer: C
IIA独学 IIA-CIA-Part3模擬 IIA-CIA-Part3書籍 IIA-CIA-Part3 IIA-CIA-Part3
Explanation:
ISO 9000 is a set of generic standards for establishing and maintaining a quality system within an
entity. The standards provide no basis forjudging the quality of the end product. The marketplace
makes this determination. The objective of ISO 9000 standards is to ensure consistent quality.
NO.7 In which of the following organizational structures does total quality management (TQM) work
best?
A. Hierarchal.
B. Teams of people from the same specialty.
C. Teams of people from different specialties.
D. Specialists working individually.
Answer: C
IIA IIA-CIA-Part3クラムメディア IIA-CIA-Part3参考書 IIA-CIA-Part3番号 IIA-CIA-Part3独学
Explanation:
TQM advocates replacement of the traditional hierarchal structure with teams of people from
different specialties. This change follows from TQM's emphasis on empowering employees and
teamwork. Employees should (1) have proper training, necessary information, and the best tools;
(2) be fully engaged in the decision process; and (3) receive fair compensation. If such empowered
employees are assembled in teams of individuals with the required skills, TQM theorists believe
they will be more effective than people performing their tasks separately in a rigid structure.
NO.8 A traditional quality control process in manufacturing consists of mass inspection of goods
only at the end of a production process. A major deficiency of the traditional control process is that:
A. It is expensive to do the inspections at the end of the process.
B. It is not possible to rework defective items.
C. It is not 100% effective.
D. It does not focus on improving the entire production process.
Answer: A
IIA学校 IIA-CIA-Part3対策 IIA-CIA-Part3独学 IIA-CIA-Part3参考書 IIA-CIA-Part3問題集
Explanation:
The process used to produce the goods is not thoroughly reviewed and evaluated for efficiency and
effectiveness. Preventing defects and increasing efficiency by improving the production process
raises quality standards and decreases costs.
