IBMのC2090-733認定試験に合格するためにたくさん方法があって、非常に少ないの時間とお金を使いのは最高で、JPexamが対応性の訓練が提供いたします。
短い時間に最も小さな努力で一番効果的にIBMのC2090-733試験の準備をしたいのなら、JPexamのIBMのC2090-733試験トレーニング資料を利用することができます。JPexamのトレーニング資料は実践の検証に合格すたもので、多くの受験生に証明された１００パーセントの成功率を持っている資料です。JPexamを利用したら、あなたは自分の目標を達成することができ、最良の結果を得ます。
IBMのC2090-733認定試験の合格証明書はあなたの仕事の上で更に一歩の昇進で生活条件が向上することが助けられます。IBMのC2090-733認定試験はIT専門知識のレベルの検査でJPexamの専門IT専門家があなたのために最高で最も正確なIBMのC2090-733試験資料が出来上がりました。JPexamは全面的な最高のIBM C2090-733試験の資料を含め、きっとあなたの最良の選択だと思います。
現在の仕事に満足していますか。自分がやっていることに満足していますか。自分のレベルを高めたいですか。では、仕事に役に立つスキルをもっと身に付けましょう。もちろん、IT業界で働いているあなたはIT認定試験を受けて資格を取得することは一番良い選択です。それはより良く自分自身を向上させることができますから。もっと大切なのは、あなたもより多くの仕事のスキルをマスターしたことを証明することができます。では、はやくIBMのC2090-733認定試験を受験しましょう。この試験はあなたが自分の念願を達成するのを助けることができます。試験に合格する自信を持たなくても大丈夫です。JPexamへ来てあなたがほしいヘルパーと試験の準備ツールを見つけることができますから。JPexamの資料はきっとあなたがC2090-733試験の認証資格を取ることを助けられます。
試験番号：C2090-733問題集
試験科目：DB2 9 Application Developer
最近更新時間：2014-01-30
問題と解答：全140問
100％の返金保証。1年間の無料アップデート。
JPexamは IBMのC2090-733認定試験の認証に対して特別な教育ツールで、あなたに多くの時間とお金が使わないようにIT技術にも身につけさせるサイトでございます。JPexamは専門家チームが自分の知識と経験をを利用してIBMのC2090-733認証試験の問題集を研究したものでございます。
もしJPexamのC2090-733問題集を利用してからやはりC2090-733認定試験に失敗すれば、あなたは問題集を購入する費用を全部取り返すことができます。これはまさにJPexamが受験生の皆さんに与えるコミットメントです。優秀な試験参考書は話すことに依頼することでなく、受験生の皆さんに検証されることに依頼するのです。 JPexamの参考資料は時間の試練に耐えることができます。JPexamは現在の実績を持っているのは受験生の皆さんによって実践を通して得られた結果です。真実かつ信頼性の高いものだからこそ、JPexamの試験参考書は長い時間にわたってますます人気があるようになっています。
JPexamは異なるトレーニングツールと資源を提供してあなたのIBMのC2090-733の認証試験の準備にヘルプを差し上げます。編成チュートリアルは授業コース、実践検定、試験エンジンと一部の無料なPDFダウンロードを含めています。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/C2090-733_exam.html
NO.1 If the following code is executed in the order shown:conDB2 As
DB2ConnectionconDB2.ConnectionString =
"Database=samplelx;UID=db2user;PWD=db2pwd;"conDB2.Open() Which of the following
statements is
correct?
A. An exception is thrown because the server name has not been specified.
B. An exception is thrown because the server name and the port have not been specified.
C. The execution is successful provided the host name SAMPLEX has been previously
defined in the
local hosts table.
D. The execution is successful provided the database alias SAMPLEX has been previously
defined in the
local database catalog.
Answer: D
IBM C2090-733参考書 C2090-733問題集 C2090-733
NO.2 Which of the following ADO .NET providers is supported by IBM DB2 Add-ins for Visual
Studio?
A. OLE DB .NET Data Provider
B. DB2 Data Provider for .NET
C. ODBC Data Provider for .NET
D. DB2 for i5/OS .NET Provider
Answer: B
IBM C2090-733参考書 C2090-733問題集 C2090-733 C2090-733参考書
NO.3 Which of the following restrictions pertains to embedded SQL external routines?
A. Environment variables with names that start with 'DB2' are not allowed.
B. Executing statements or commands that are connection related is not allowed.
C. Environment variable values that were set before the DB2 database manager is started
are not
available.
D. When returning result sets from external nested stored procedures, a cursor cannot be
opened with
the same name onmultiple nesting levels.
Answer: B
IBM問題集 C2090-733 C2090-733問題集 C2090-733 C2090-733過去問 C2090-733参考書
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.
NO.4 Given the following table definition:CREATE TABLE staff ( id SMALLINT NOT NULL,
name
VARCHAR(9), dept SMALLINT, job CHAR(5)) Assuming that the following statements
execute
successfully:Dim cmdStaff As DB2Command = cnDb2.CreateCommand()
cmdStaff.CommandText =
"SELECT name FROM staff WHERE (job = @job)" Which of the following is the correct way
to provide a
value for the parameter marker used?
A. cmdStaff.Parameters.Add("@job", "Mgr", CType(5, Char))
B. cmdStaff.Parameters.Add("@job", "Mgr", DB2Type.Char, 5)
C. cmdStaff.Parameters.Add(New DB2Parameter("@job", CType(5, Char))
cmdStaff.Parameters("@job").Value = "Mgr"
D. cmdStaff.Parameters.Add(New DB2Parameter("@job", DB2Type.Char, 5)
cmdStaff.Parameters("@job").Value ="Mgr"
Answer: D
IBM C2090-733参考書 C2090-733認定試験 C2090-733 C2090-733
NO.5 After installing the DB2 Express-C 9 it was discovered that the Development
Workbench was not
available. What
was the reason for that?
A. It must be installed separately.
B. It is not supported with DB2 Express-C 9.
C. Since it is a licensed tool, it must be purchased from IBM.
D. Review the DB2 installation log for errors. Reinstall DB2 Express-C 9.
Answer: A
IBM C2090-733 C2090-733 C2090-733認定資格
NO.6 An SQL procedure has been developed with several inline SQL PL statements
encapsulated in a
dynamic compound SQL statement. The procedure had been tested and performed well.
After making a
change to the last SQL statement the procedure not only failed to complete, but did not
produce output
from any statements which were not modified. What is the best explanation for this behavior?
A. The dynamic compound SQL is atomic.
B. The procedure doesn't have any savepoints.
C. The procedure has not been correctly re-cataloged.
D. The dynamic compound SQL individual statements are logically dependent on each other.
Answer: A
IBM C2090-733 C2090-733 C2090-733
NO.7 Which of the following is a SQL stored procedure which will return a resultset
containing ID, NAME,
DEPT and JOB values out of the STAFF table?
A. CREATE PROCEDURE result_set() LANGUAGE SQL BEGIN SELECT id, name, dept,
job FROM
staff; END
B. CREATE PROCEDURE result_set LANGUAGE SQL RESULT SETS 1 BEGIN SELECT
id, name,
dept, job FROM staff; END
C. CREATE PROCEDURE result_set RESULT SETS 1 BEGIN DECLARE c1 CURSOR FOR
SELECT id,
name, dept, job FROM staff; OPEN C1; END
D. CREATE PROCEDURE result_set()
LANGUAGE SQL RESULT SETS 1 BEGIN DECLARE c1 CURSOR WITH RETURN FOR
SELECT id,
name, dept, job FROM staff; OPEN c1; END
Answer: D
IBM認証試験 C2090-733 C2090-733過去問
NO.8 Given following table:
EMP
EMPNO NAME DEPTNO SALARY
=====
==== ======
======
0010 JOSH D95 30000
0020 JENNA D98 25000
0030 DYLAN
D95 10000
0040 TRACY D90 33000
and the following trigger definition:CREATE TRIGGER track_chgsAFTER UPDATE OF
salary, name,
empno ON emp REFERENCING NEW_TABLE AS ntable FOR EACH STATEMENT MODE
DB2SQLBEGIN ATOMIC INSERT INTO changes SELECT empno, CURRENT TIMESTAMP
FROM
ntable; END; After executing the following SQL statements:DELETE FROM changes;
UPDATE emp SET
deptno = 'D98' WHERE deptno = 'D95'; INSERT INTO emp VALUES('0050', 'KEN', 'D90',
35000);
UPDATE emp SET salary = salary - 500 WHERE salary > 35000;UPDATE emp SET salary =
salary +
1000 WHERE salary <= 25000;What value will be returned by this query?SELECT count(*)
FROM
changes
A. 2
B. 3 C. 4
D. 6
Answer: A
IBM C2090-733参考書 C2090-733認定証 C2090-733
NO.9 After executing the following SQL statements: CREATE TABLE tab1 ( col1 INT ,col2
CHAR(1),
PRIMARY KEY(col1)); CREATE TABLE tab2 ( col1 INT ,col2 CHAR(1), FOREIGN KEY
(col1)
REFERENCES tab1(col1) ON DELETE CASCADE ON UPDATE NO ACTION ); INSERT
INTO tab1
VALUES(1, 'A'); INSERT INTO tab1 VALUES(2, 'B'); INSERT INTO tab2 VALUES(3, 'A');
INSERT INTO
tab2 VALUES(2, 'B'); UPDATE tab1 SET col1 = col1 + 1;DELETE FROM tab1 WHERE col2
= 'B';
What values will be returned by the following SQL query?SELECT col1, col2 FROM tab1
A.COL1 COL2
==== ==== 2 'B'
A. COL1 COL2 ==== ==== 2 'B'
B. COL1 COL2 ==== ==== 2 'A'
C. COL1 COL2 ==== ==== 1 'A' 2 'B'
D. COL1 COL2 ==== ==== 2 'A' 3 'B'
Answer: B
IBM問題集 C2090-733問題集 C2090-733認定試験 C2090-733問題集 C2090-733認証試験
NO.10 Table EMPLOYEE contains the following rows: EMPNO FIRSTNME LASTNAME
WORKDEPT
000010.CHRISTINE HAAS A00 000020 MICHAEL THOMPSON B01 000030 SALLY KWAN
C01 The
isolation level for Application 1 is set to CS and autocommit is disabled. The isolation level for
Application
2 is set to CS and the autocommit is enabled. The following statements are executed in
sequence:
Application 1:
DECLARE c1 CURSOR FOR SELECT * FROM employee ORDER BY empno OPEN C1
FETCH C1
FETCH C1 Application 2:
UPDATE employee SET lastname = 'MILLFORD' WHERE empno = '000020' Which of the
following
statements is correct?
A. The UPDATE succeeds because Application 2 runs with autocommit enabled so no row
level locks are
necessary for the update.
B. The UPDATE succeeds because Application 1 holds a row level lock that is compatible
with the lock
required by Application 2.
C. The UPDATE fails because Application 1 holds a row level read lock that is in conflict with
the lock
required by Application 2.C.
D. The UPDATE fails because the row level locks held by Application 1 have been escalated
to table lock
so updates by other connections are disallowed.
Answer: B
IBM C2090-733参考書 C2090-733 C2090-733 C2090-733
NO.11 Two OLTP applications run concurrently but frequent locking occurs which requires a
fix to be applied.
Application A inserts rows into the table T1. Application B submits several queries against the
table with a
Cursor Stability isolation level. What would be the best course of action to improve the
system's
concurrency and performance?
A. Application B should be changed to access a view of table T1.
B. Application B should be changed to a Read Stability isolation level.
C. Application A should be changed to perform a commit after each INSERT operation.
D. Application A should be changed to include the NOT WITH HOLD clause on each INSERT
operation.
Answer: C
IBM問題集 C2090-733 C2090-733 C2090-733練習問題 C2090-733
NO.12 Which of the following is a characteristic of an application that uses a Distributed Unit of
Work
(DUOW)?
A. A single transaction can only read and/or modify data stored on one database server.
B. Multiple transactions can only read and/or modify data stored on one database server.
C. A single transaction can read and/or modify data stored across multiple database servers.
D. Multiple transactions can read and/or modify data stored on multiple database servers
provided each
transaction only accesses a single server.
Answer: C
IBM認定試験 C2090-733 C2090-733 C2090-733参考書
NO.13 An application running against a DB2 for AIX database needs to execute the following
query:SELECT
t2.c2, t1.c3 FROM t1 INNER JOIN t2 ON t1.c1 = t2.c1 If table T1 resides in the DB2 for AIX
database and
table T2 resides in a DB2 for i5/OS database, which of the followingDB2 object types must
the identifier
T2 represent in order for this SQL statement to run successfully?
A. ALIAS
B. NICKNAME
C. SERVER TABLE
D. TABLE WRAPPER
Answer: B
IBM C2090-733 C2090-733
NO.14 Which of the following SQL statements demonstrates the correct usage of a
parameter marker?
A. SELECT ? FROM SYSCAT.TABLES
B. SELECT [] FROM SYSCAT.TABLES
C. SELECT CAST(? AS INTEGER) FROM SYSCAT.TABLES
D. SELECT CAST([] AS INTEGER) FROM SYSCAT.TABLES
Answer: C
IBM C2090-733認証試験 C2090-733問題集 C2090-733過去問
NO.15 A .NET application executes a SQL request invoking the
DB2Command.ExecuteReader method and a
syntax errorexception is thrown. Which of the following properties contains the SQLCode for
this syntax
error?
A. DB2Error.SQLCode
B. SQLError.SQLCode
C. DB2Exception.SQLCode
D. SQLException.SQLCode
Answer: A
IBM C2090-733認定試験 C2090-733 C2090-733
NO.16 Given the following table and view definitions: CREATE TABLE city ( cityid INT
GENERATED
ALWAYS AS IDENTITY , city_name CHAR(10), state_code CHAR(2) CHECK(state_code IN
('CA','IL','NY','OH','TX')));CREATE VIEW city_view AS ( SELECT city_name||','||state_code
AS fullname
FROM city WHERE state_code NOT IN ('OH','IL')); and the following trigger
definition:CREATE
TRIGGER city_viewInput INSTEAD OF INSERT ON city_view REFERENCING NEW AS
nFOR EACH
ROW MODE DB2SQLBEGIN ATOMIC DECLARE delim INT;SET delim = LOCATE(',',
n.fullname);
INSERT INTO city(city_name,state_code) VALUES(SUBSTR(n.fullname, 1, delim - 1),
SUBSTR(n.fullname, delim + 1, 2));END; If the following SQL statments are
executed:INSERT INTO city
VALUES(DEFAULT,'San Jose','CA') ; INSERT INTO city_view VALUES('Chicago,IL');
INSERT INTO city
VALUES(DEFAULT,'Detroit','MI'); INSERT INTO city VALUES(DEFAULT,'Austin','TX');
INSERT INTO
city_view VALUES('Denver,CO'); How many rows will be returned by the following query:
SELECT *
FROM city
A. 1
B. 2
C. 3
D. 4
Answer: C
IBM C2090-733練習問題 C2090-733 C2090-733問題集
NO.17 Which of the following is the DB2 Data Provider for the .NET class that requires a
database connection
to be open?
A. DB2DataSet
B. DB2RecordSet
C. DB2DataReader
D. DB2DataAdapter
Answer: C
IBM認定試験 C2090-733 C2090-733練習問題 C2090-733 C2090-733 C2090-733練習問題
NO.18 What is the minimum privilege required to run a User Defined Function (UDF)?
A. CALL
B. EXECUTE
C. SYSCTRL
D. SYSMAINT
Answer: B
IBM C2090-733 C2090-733 C2090-733 C2090-733
NO.19 Parameter markers are NOT permitted for which of the following statements?
A. CALL
B. DELETE C. EXECUTE IMMEDIATE
D. SET CURRENT SQLID
Answer: C
IBM過去問 C2090-733認証試験 C2090-733 C2090-733練習問題 C2090-733
NO.20 A table named ACTIVITY.LOG was created by executing the following
statement:CREATE TABLE
activity.log (event VARCHAR(128), date DATE) Then, a stored procedure named
ACTIVITY.LOGEVENT
was created by executing the following statement: CREATE PROCEDURE
activity.logEvent(IN stmtType
CHAR(1)) LANGUAGE SQLMainBody: BEGIN DECLARE sqlerrm VARCHAR(256)
DEFAULT '';
DECLARE ErrorIndicator CHAR(1) DEFAULT 'N';
SQLStmt: BEGIN
DECLARE CONTINUE HANDLER FOR SQLEXCEPTION
BEGIN
SET ErrorIndicator = 'Y';
END;
IF stmtType = 'I' THEN
INSERT INTO activity.log VALUES('Insert Operation Performed.', CURRENT_DATE);
ELSEIF stmtType = 'U' THEN
INSERT INTO activity.log VALUES('Update Operation Performed.', CURRENT_DATE);
ELSEIF stmtType = 'D' THEN I
NSERT INTO activity.log VALUES('Delete Operation Performed.', CURRENT_DATE);
ELSE
SET ErrorIndicator = 'Y';
END IF;
END SQLStmt;
IF ErrorIndicator = 'Y' THEN
SIGNAL SQLSTATE '70000' SET message_text = 'Could not update activity log.';
END IF;
END MainBody
User USER1 has the authority to access/manipulate data in the ACTIVITY.LOG table as well
as to invoke
the
procedure ACTIVITY.LOGEVENT. If user USER1 executes the following commands:
CONNECT TO sample USER user1 USING ibmdb2;
DELETE FROM activity.log;
CALL activity.logEvent('i'); What will be the results?
A. The string "Insert Operation Performed." and the system date will be written to the
ACTIVITY.LOG
table.
B. The string "Update Operation Performed." and the system date will be written to the
ACTIVITY.LOG
table.
C. The string "Delete Operation Performed." and the system date will be written to the
ACTIVITY.LOG
table.
D. The error message 'SQL0438N Application raised error with diagnostic text: "Could not
update activity
log.".SQLSTATE=70000' will be generated.
Answer: D
IBM C2090-733 C2090-733 C2090-733
JPexamは最新の74-325問題集と高品質のNS0-504問題と回答を提供します。JPexamの70-481 VCEテストエンジンと70-336試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のLOT-406 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论