HP HP0-Y19 exam study materials

In order to protect the vital interests of each IT certification exams candidate, IT-Tests.com provides high-quality HP HP0-Y19 exam training materials. This exam material is specially developed according to the needs of the candidates. It is researched by the IT experts of IT-Tests.com. Their struggle is not just to help you pass the exam, but also in order to let you have a better tomorrow.

If you IT-Tests, IT-Tests.com can ensure you 100% pass HP certification HP0-Y19 exam. If you fail to pass the exam, IT-Tests.com will full refund to you.

Exam Code: HP0-Y19
Exam Name: HP (ProCurve Accelerated ASE Mobility)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 63 Questions and Answers
Last Update: 2013-11-01

IT industry is growing very rapidly in the past few years, so a lot of people start to learn IT knowledge, so that keep them for future success efforts. HP HP0-Y19 certification exam is essential certification of the IT industry, many people frustrated by this certification. Today, I will tell you a good way to pass the exam which is to choose IT-Tests.com HP HP0-Y19 exam training materials. It can help you to pass the exam, and we can guarantee 100% pass rate. If you do not pass, we will guarantee to refund the full purchase cost. So you will have no losses.

HP HP0-Y19 certification can guarantee you have good job prospects, because HP certification HP0-Y19 exam is a difficult test of IT knowledge, passing HP certification HP0-Y19 exam proves that your IT expertise a strong and you can be qualified for a good job.

To choose our IT-Tests.com to is to choose success! IT-Tests.com provide you HP certification HP0-Y19 exam practice questions and answers, which enable you to pass the exam successfully. Simulation tests before the formal HP certification HP0-Y19 examination are necessary, and also very effective. If you choose IT-Tests, you can 100% pass the exam.

IT certification candidates are mostly working people. Therefore, most of the candidates did not have so much time to prepare for the exam. But they need a lot of time to participate in the certification exam training courses. This will not only lead to a waste of training costs, more importantly, the candidates wasted valuable time. Here, I recommend a good learning materials website. Some of the test data on the site is free, but more importantly is that it provides a realistic simulation exercises that can help you to pass the HP HP0-Y19 exam. IT-Tests.com HP HP0-Y19 exammaterials can not only help you save a lot of time. but also allows you to pass the exam successfully. So you have no reason not to choose it.

HP HP0-Y19 is a certification exam to test IT professional knowledge. IT-Tests.com is a website which can help you quickly pass the HP certification HP0-Y19 exams. Before the exam, you use pertinence training and test exercises and answers that we provide, and in a short time you'll have a lot of harvest.

HP0-Y19 (ProCurve Accelerated ASE Mobility) Free Demo Download: http://www.it-tests.com/HP0-Y19.html

NO.1 On a ProCurve Switch 8212zl, which feature must be enabled before you can enable VRRP?
A.MSTP
B.IP routing
C.IP multicast
D.RIP
Correct:B

HP questions   HP0-Y19 certification training   HP0-Y19 braindump

NO.2 You are planning a network upgrade at a small company. During a meeting, you learn that the
customer will install VoIP telephones that set Layer 2 priority markers for allvoice traffic, and the
VoIP traffic will not cross any routed links. What is necessary to ensure that ProVision ASIC
switches maintain the priorities set by the phones? (Selecttwo.)
A.LLDP-MED for all voice VLANs
B.an IEEE 802.1p-to-DSCP map for voice traffic
C.port-based priorities for ports connected to phones
D.default QoS settings
E.tagged links for all voice VLAN traffic
Correct:D E

HP questions   HP0-Y19 certification training   HP0-Y19 braindump

NO.3 Port C1 on a ProCurve Switch 5412zl is a tagged member of VLAN 50 and an untagged member
of VLAN 1. Port C2 and port C3 are at default VLAN settings. What is the effect of the following
command entered at the CLI? 5412zl(config)# trunk c1-c3 trk1
A.The trunk is defined as an untagged member of VLAN 1, but port C1 is not included.
B.The trunk is not defined, because the ports' VLAN memberships do not match.
C.The trunk is defined as an untagged member of VLAN 1 and a tagged member of VLAN 50.
D.The trunk is defined as an untagged member of VLAN 1 but is not a member of VLAN 50.
Correct:D

HP questions   HP0-Y19 certification training   HP0-Y19 braindump

NO.4 You configured VLAN 10 and VLAN 24 on a ProCurve Switch 3500yl-48G. The network servers
reside in VLAN 10, which has an IP address range of 10.1.10.0/24. Network clients reside in VLAN
24, which has an IP address range of 10.1.24.0/24. You configure an ACL with these entries and
apply it statically to ports in VLAN 24: permit tcp 10.1.24.0 0.0.0.0 10.1.10.10 255.255.255.255 eq ftp
permit tcp 10.1.24.0 0.0.0.0 10.1.10.10 255.255.255.255 eq http permit tcp 10.1.24.0 0.0.0.0
10.1.10.10 255.255.255.255 eq telnet What is the effect of these ACLs on the clients located in
VLAN 24?
A.They would have no access at all, because the ACL is misconfigured.
B.They would be allowed only FTP, HTTP, and Telnet access to 10.1.10.10, but no access anywhere else.
C.They would be allowed only FTP, HTTP, and Telnet access to 10.1.10.10, but full access to everything
else in the 10.1.10.0 subnet.
D.They could not access anything in the 10.1.10.0 subnet, because IP has not been specified in the ACL.
Correct:B

HP questions   HP0-Y19 certification training   HP0-Y19 braindump

NO.5 Click the Exhibit button. What does this output from the show ip ospf neighbor command
indicate about the OSPF neighbor relationship between this router and the router with ID 10.3.0.1?
A.They are in different OSPF areas.
B.They have not formed an adjacency.
C.They are configured with different OSPF versions.
D.They are not eligible to be elected DR or BDR.
Correct:B

HP questions   HP0-Y19 certification training   HP0-Y19 braindump

NO.6 You must configure a ProCurve Switch 8212zl to be the Backup router for a VRID associated
with VLAN 10. What must be true of the virtual IP address for the VRID on this router?
A.It must be an address assigned to a multi-netted interface.
B.It must be an address that is not assigned to any interface on either router.
C.It must match the Backup router's address for the VLAN 10 interface.
D.It must match the Owner router's address for the VLAN 10 interface.
Correct:D

HP questions   HP0-Y19 certification training   HP0-Y19 braindump

NO.7 You connect an IP telephone that supports LLDP-MED to a port on a ProCurve Switch 5406zl.
The port is a member of a voice VLAN and also requires 802.1X authentication. How will
LLDP-MED and 802.1X interact?
A.The switch will exempt the phone from the 802.1X requirement after confirming its LLDP-MED
information.
B.The switch will submit the phone's authentication credentials to a RADIUS server after the devices
exchange LLDP-MED information.
C.The switch will permit LLDP-MED communication with the phone after authentication is complete.
D.The switch will use information from the phone's first LLDP-MED frame to submit its authentication
credentials.
Correct:C

HP questions   HP0-Y19 certification training   HP0-Y19 braindump

NO.8 Click the Exhibit button. What is the role of this Switch 3500yl in the OSPF routing domain?
A.ASBR
B.virtual router
C.ABR
D.internal router
Correct:D

HP questions   HP0-Y19 certification training   HP0-Y19 braindump

NO.9 Which part of the multicast address range is reserved for applications that will remain within an
enterprise intranet?
A.Internetwork Control Block
B.AD-HOC Block
C.Administratively Scoped Address Block
D.Local Network Control Block
Correct:C

HP questions   HP0-Y19 certification training   HP0-Y19 braindump

NO.10 You must configure Multiple Spanning Tree Protocol (MSTP) on two ProCurve 8212zl switches
and four 5406zl switches. Which configuration is necessary to ensure that all of the switches join
the same MST region?
A.The switches must have identical Port Priorities for shared links in each MST instance.
B.Bridge Priorities on all switches must be configured so that each MST instance has a different Root
Bridge.
C.All switch-to-switch links in each MST instance must be tagged members of all user VLANs.
D.The switches must be configured with identical config-names, config-revisions, and VLAN-to-instance
mappings.
Correct:D

HP questions   HP0-Y19 certification training   HP0-Y19 braindump

IT-Tests.com offer the latest 200-001 Questions & Answers and high-quality PDF Practice Test. Our 700-104 VCE testing engine and 000-122 study guide can help you pass the real exam. High-quality 200-120 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/HP0-Y19.html