Now IT industry is more and more competitive. Passing Juniper JN0-331 exam certification can effectively help you entrench yourself and enhance your status in this competitive IT area. In our IT-Tests.com you can get the related Juniper JN0-331 exam certification training tools. Our IT-Tests.com IT experts team will timely provide you the accurate and detailed training materials about Juniper certification JN0-331 exam. Through the learning materials and exam practice questions and answers provided by IT-Tests, we can ensure you have a successful challenge when you are the first time to participate in the Juniper certification JN0-331 exam. Above all, using IT-Tests.com you do not spend a lot of time and effort to prepare for the exam.
The life which own the courage to pursue is wonderful life. Someday when you're sitting in a rocking chair to recall your past, and then with smile in your face. Then your life is successful. Do you want to be successful in life? Then use IT-Tests.com's Juniper JN0-331 exam training materials quickly. This material including questions and answers and every IT certification candidates is very applicable. The success rate can reach up to 100%. Why not action? Quickly to buy it please.
IT-Tests.com has a huge team of IT experts, who continue to use their knowledge and experience to study a lot of IT certification examination papers of past few years. Their findings of the research is now the product of IT-Tests, therefore IT-Tests's Juniper JN0-331 practice questions are very similar with the real exam, which can help a lot of people to realize their dreams. IT-Tests.com can ensure you to successfully pass the exam, and you can boldly Add IT-Tests's products to your shopping cart. With IT-Tests.com your dreams can be achieved immediately.
If you attend Juniper certification JN0-331 exams, your choosing IT-Tests.com is to choose success! I wish you good luck.
Exam Code: JN0-331
Exam Name: Juniper (SEC,Specialist(JNCIS-SEC))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 131 Questions and Answers
Last Update: 2013-09-18
We will not only ensure you to pass the exam, but also provide for you a year free update service. If you are not careful to fail to pass the examination, we will full refund to you. However, this possibility is almost not going to happen. We can 100% help you pass the exam, you can download part of practice questions from IT-Tests.com as a free try.
Now it is a society of abundant capable people, and there are still a lot of industry is lack of talent, such as the IT industry is quite lack of technical talents. Juniper certification JN0-331 exam is one of testing IT technology certification exams. IT-Tests.com is a website which provide you a training about Juniper certification JN0-331 exam related technical knowledge.
If you have IT-Tests.com's Juniper JN0-331 exam training materials, we will provide you with one-year free update. This means that you can always get the latest exam information. As long as the Exam Objectives have changed, or our learning material changes, we will update for you in the first time. We know your needs, and we will help you gain confidence to pass the Juniper JN0-331 exam. You can be confident to take the exam and pass the exam.
JN0-331 (SEC,Specialist(JNCIS-SEC)) Free Demo Download: http://www.it-tests.com/JN0-331.html
NO.1 What are two components of the JUNOS Software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC
Juniper test questions JN0-331 exam JN0-331 original questions JN0-331
NO.2 What is the default session timeout for UDP sessions?
A. 30 seconds
B. 1 minute
C. 5 minutes
D. 30 minutes
Answer: C
Juniper JN0-331 pdf JN0-331 JN0-331 JN0-331
NO.3 Click the Exhibit button.
[edit schedulers]
user@host# show
scheduler now {
monday all-day;
tuesday exclude;
wednesday {
start-time 07:00:00 stop-time 18:00:00;
}
thursday {
start-time 07:00:00 stop-time 18:00:00;
}
}
[edit security policies from-zone Private to-zone External]
user@host# show
policy allowTransit {
match {
source-address PrivateHosts;
destination-address ExtServers;
application ExtApps;
}
then {
permit {
tunnel {
ipsec-vpn myTunnel;
}
}
}
scheduler-name now;
Based on the configuration shown in the exhibit, what are the actions of the security policy?
A. The policy will always permit transit packets and use the IPsec VPN myTunnel.
B. The policy will permit transit packets only on Monday, and use the IPsec VPN Mytunnel.
C. The policy will permit transit packets and use the IPsec VPN myTunnel all day Monday and
Wednesday 7am to 6pm, and Thursday 7am to 6pm.
D. The policy will always permit transit packets, but will only use the IPsec VPN myTunnel all day Monday
and Wednesday 7am to 6pm, and Thursday 7am to 6pm.
Answer: C
Juniper JN0-331 test answers JN0-331 demo JN0-331 JN0-331
NO.4 Which two functions of JUNOS Software are handled by the data plane? (Choose two.)
A. NAT
B. OSPF
C. SNMP
D. SCREEN options
Answer: AD
Juniper test JN0-331 questions JN0-331 exam JN0-331
NO.5 Click the Exhibit button.
[edit groups]
user@host# show
node0 {
system {
host-name NODE0;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.1/24;
}
}
}
}
}
node1 {
system {
host-name NODE1;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.2/24;
}
}
}
}
}
In the exhibit, what is the function of the configuration statements?
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
Answer: D
Juniper JN0-331 JN0-331 test questions JN0-331
NO.6 By default, which condition would cause a session to be removed from the session table?
A. Route entry for the session changed.
B. Security policy for the session changed.
C. The ARP table entry for the source IP address timed out.
D. No traffic matched the session during the timeout period.
Answer: D
Juniper JN0-331 original questions JN0-331 JN0-331 test
NO.7 Which three functions are provided by JUNOS Software for security platforms? (Choose three.)
A. VPN establishment
B. stateful ARP lookups
C. Dynamic ARP inspection
D. Network Address Translation
E. inspection of packets at higher levels (Layer 4 and above)
Answer: ADE
Juniper JN0-331 test answers JN0-331 JN0-331 exam
NO.8 Which two statements are true regarding proxy ARP? (Choose two.)
A. Proxy ARP is enabled by default.
B. Proxy ARP is not enabled by default.
C. JUNOS security devices can forward ARP requests to a remote device when proxy ARP is enabled.
D. JUNOS security devices can reply to ARP requests intended for a remote device when proxy ARP is
enabled.
Answer: BD
Juniper dumps JN0-331 JN0-331 test questions JN0-331
NO.9 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections.
How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D
Juniper JN0-331 study guide JN0-331 JN0-331 study guide
NO.10 Regarding zone types, which statement is true?
A. You cannot assign an interface to a functional zone.
B. You can specifiy a functional zone in a security policy.
C. Security zones must have a scheduler applied.
D. You can use a security zone for traffic destined for the device itself.
Answer: D
Juniper JN0-331 JN0-331 study guide
NO.11 For IKE phase 1 negotiations, when is aggressive mode typically used?
A. when one of the tunnel peers has a dynamic IP address
B. when one of the tunnel peers wants to force main mode to be used
C. when fragmentation of the IKE packet is required between the two peers
D. when one of the tunnel peers wants to specify a different phase 1 proposal
Answer: A
Juniper exam dumps JN0-331 test questions JN0-331 JN0-331 certification training JN0-331 JN0-331
NO.12 Regarding attacks, which statement is correct?
A. Both DoS and propagation attacks exploit and take control of all unprotected network devices.
B. Propagation attacks focus on suspicious packet formation using the DoS SYN-ACK-ACK proxy flood.
C. DoS attacks are directed at the network protection devices, while propagation attacks are directed at
the servers.
D. DoS attacks are exploits in nature, while propagation attacks use trust relationships to take control of
the devices.
Answer: D
Juniper questions JN0-331 JN0-331 test answers JN0-331 JN0-331 dumps JN0-331 original questions
NO.13 Which two statements about JUNOS Software packet handling are correct? (Choose two.)
A. JUNOS Software applies service ALGs only for the first packet of a flow.
B. JUNOS Software uses fast-path processing only for the first packet of a flow.
C. JUNOS Software performs route and policy lookup only for the first packet of a flow.
D. JUNOS Software applies SCREEN options for both first and consecutive packets of a flow.
Answer: CD
Juniper JN0-331 JN0-331 JN0-331 JN0-331
NO.14 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. Network Address Translation
Answer: B
Juniper demo JN0-331 study guide JN0-331 answers real questions JN0-331 JN0-331 answers real questions
NO.15 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms does not forward traffic by default; a traditional router forwards
traffic by default.
C. JUNOS Software for security platforms uses session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms performs route lookup for every packet; a traditional router
performs route lookup only for the first packet.
Answer: BC
Juniper practice test JN0-331 JN0-331 test answers JN0-331 JN0-331 JN0-331
NO.16 In JUNOS Software, which three packet elements can be inspected to determine if a session already
exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer: ACE
Juniper exam dumps JN0-331 JN0-331 JN0-331 certification JN0-331 practice test
NO.17 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms secures traffic by default; a traditional router does not secure
traffic by default.
C. JUNOS Software for security platforms allows for session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms separates broadcast domains; a traditional router does not
separate broadcast domains.
Answer: BC
Juniper JN0-331 JN0-331 braindump JN0-331
NO.18 What is the purpose of a zone in JUNOS Software?
A. A zone defines a group of security devices with a common management.
B. A zone defines the geographic region in which the security device is deployed.
C. A zone defines a group of network segments with similar security requirements.
D. A zone defines a group of network segments with similar class-of-service requirements.
Answer: C
Juniper certification JN0-331 JN0-331 JN0-331 JN0-331
NO.19 Which two configurations are valid? (Choose two.)
A. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
security-zone blue {
interfaces {
ge-0/0/2.0;
ge-0/0/3.102;
}
}
B. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/2.0;
}
}
security-zone blue {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
C. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/2.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/3.0;
}
D. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/3.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/2.0;
}
Answer: AD
Juniper JN0-331 exam JN0-331 JN0-331 test JN0-331 exam simulations JN0-331 exam prep
NO.20 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the device itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC
Juniper exam dumps JN0-331 JN0-331 dumps
IT-Tests.com offer the latest JN0-533 Questions & Answers and high-quality E20-891 PDF Practice Test. Our LOT-404 VCE testing engine and 1Z0-511 study guide can help you pass the real exam. High-quality HP2-B100 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.it-tests.com/JN0-331.html
没有评论:
发表评论